The Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar # RTL002 that you referenced is designed for use on pick-up trucks to carry a kayak over the truck bed, but could work well to carry your kayak on your Yamaha Rhino UTV with 2 inch hitch receiver. We will want to take a quick measurement to determine the compatibility of the load extender with your UTV.
The hitch-mounted extension is adjustable vertically from 42 inches to 64 inches above the top of the hitch opening. If... view full answer...
I spoke with my contact at Classic Accessories and she stated that the All-Weather UTV Cab Enclosure, # CA18020, will fit all current models of the Kawasaki Teryx, including your 2008. I have included a link to the installation details for you. view full answer...
The Classic Accessories All-Weather UTV Cab Enclosure # CA18020 will only fit your 2008 Kawasaki Teryx 750 if you remove the roof. There isn't a similar option that will work with your Kawasaki that will allow you to retain the roof. view full answer...
That's a good question and we have had a number of people wanting to do the same thing, but e-track does need to be mounted parallel to your UTV, in the direction of travel. Wheel straps pulling to the side, opposite the direction of travel, can put undue stress on the straps with what is essentially a moving load.
So what you will want is horizontal e-track with wheel straps:
- Erickson Horizontal E-Track - 4 Feet # EM19147 or 5 Feet # E19148
- Erickson E-Track Wheel Tie-Down Strap... view full answer...
We went out to the warehouse and measured the Classic Accessories Quick-Fit UTV Bench Seat Cover for the Kawasaki Mule 4000/4010, item # CA18033. The bench cover measures 41-1/2 inches x17 inches seam to seam for the top part of the bench. The back cover measures 44-1/2 inches x 10 inches seam to seam.
I have posted a photo showing the measurements I took. You would need to compare the dimensions to your Mule to see if it would fit or not. view full answer...
I think the adaption can be made for the CIPA UTV Adjustable Side Mirror - Black - Left Hand, # CMM37 and the right hand # CMM38 to fit your 1 inch bars, but that would take some shimming. The 1-3/4 inch round clamp would need a shim that will grip as well as allow pressure for a tight fit.
Another option would be to use the CIPA Handlebar Grip Mount ATV Mirror, # CM-11126 on the top front rail to adjust for that side view mirror adjustment. view full answer...
My contact at Airaid checked the air filters specified for your 2007 Honda TRX680 4-Wheeler and based on his research a better filter option for your ATV is their # AR700-493. This filter has a 3-inch flange to mate with your intake, a base diameter of 6-inches, a top diameter of 4-5/8-inches and a height of 6-inches. If these dimensions match your current filter then this one should be a good fit.
Since these filters are NOT vehicle-specific you'll need to check the measurements of your... view full answer...
For your 2015 Polaris Ranger 900 crew cab we have the Classic Accessories UTV Seat Cover # 052963783773 that you referenced as a confirmed fit in the color black, but we do not have any other colors. This does fit your seat style though. view full answer...
So long as you have the needed clearance, you can go from a size 18x8.50-8 tire and wheel to a 12 inch wheel; the general rule of thumb is you want at least 3" of clearance from the top of the tire to your fender (if your golf cart has one) and at least 1" of clearance between the inside of the tire and your frame rail.
A 18x8.50-8 tire and wheel measures 8.5" wide and 17.8" in diameter, so you'll want to keep that in mind. We do have 12 inch wheels and tires with a 5 on 4-1/2" bolt pattern,... view full answer...